|
Product Description
Keeney’s Seal Test™ bath drains are an easy way to pressure
test a DWV system. The screw-on test plugs allow the installer to seal off the
overflow and waste shoe and pressure test up to three stories. After the test,
simply pry off the test plug from the overflow, unscrew the test plug from the
waste shoe and replace them with the drain closure and overflow faceplate.
Additionally, Seal Test bath drains use a combination of two seals, a sponge
rubber washer against the back wall, and a flat rubber washer that seats at the
interior tub wall ensuring years of leak and mold free operation.
|
Login
